Capabilities
Bespoke Lighting, From Drawing to Delivery
Every fixture begins as a line on someone else's drawing. Our work is to keep that line intact through engineering, sampling, finishing and delivery — so what arrives on site still reads as the design that was approved.
Bespoke Engineering
Geometry, dimension and finish resolved fixture by fixture, never adapted from a catalogue.
What you bring
You have a designer's fixture schedule and a room with its own constraints; stock sizes will not answer either.
How we answer
We build each fixture around the drawing: canopy position, drop length, tube diameter, glass aperture and the way the light falls on the surface below. Every change is returned as a shop drawing before metal is cut.
Drawing Development
Shop drawings, node details and load calculations coordinated directly with the design team.
What you bring
Your ceiling, structure and services are already fixed; the lighting has to land inside them without compromise.
How we answer
We translate the design intent into production drawings, check fixing points against the ceiling build-up, and flag tolerances early — so installation day follows a known sequence instead of a site decision.
Samples & Sealing
A lit mock-up in your specified finish, approved and sealed before production begins.
What you bring
Drawings cannot show how champagne gold reads under 2700K, or how a fabric shade holds its shape.
How we answer
We produce a working sample with the specified LED, driver and finish, photograph it lit, and seal the approved version. The sealed sample becomes the reference for every unit in the batch.
Production & Delivery
Batch consistency, inspection records and packing planned around the installation programme.
What you bring
A hotel opening date does not move because a crate is late or one fixture arrives in the wrong finish.
How we answer
Production is scheduled against your installation sequence, with in-process checks at wiring, finishing and final light-up. Fixtures are labelled by room and level, then packed for the site's access conditions.
Workflow
Five Stages, One Sequence
Requirement & Drawings
Fixture schedule, finishes, ceiling conditions and programme reviewed together.
Scheme & Shop Drawings
Proposed construction, fixing detail and load checked against the design intent.
Sample & Approval
A lit mock-up in the specified finish, revised until approved and sealed.
Batch Production
Metalwork, finishing, wiring and assembly scheduled to the installation sequence.
Inspection & Shipping
Light-up checks, labelling by room and packing for site access.
Materials & Finishes
Chosen for How They Hold Light
A finish is not a colour chip. We test it on the produced form, lit, in the room's colour temperature.
Metal
Brass, bronze and steel — spun, welded and finished by hand to a sealed sample.
Glass
Hand-blown and pressed shades, opal or ribbed, selected for the light they diffuse.
Stone
Marble and travertine bases, cut and matched so veining stays consistent in a room.
Fabric
Linen and silk shades with heat-safe linings, stretched to keep a clean silhouette.
Have a Fixture Schedule to Review?
Send the drawings and we will reply with questions, options and a realistic sampling timeline.
Start a Project